Fractional Laser Revival: Procedure Description

Fractional Laser Revival

All women dream of preserving as much of their beauty and youth as possible while resorting to various methods. Modern medicine has not stagnated, but is actively developing in the field of beauty, providing various procedures and operations that make it younger.

Techniques that can hide obvious signs of aging without surgery and cosmetic injections are well known and in great demand. In the modern world, partial laser rejuvenation is considered to be one of the most effective ways to combat age-related skin changes.

Fractional Laser: What is

When the laser is aimed at the skin, burns will occur, and the depth of the burn will be greater. The regeneration process is activated, which helps to achieve the desired result. Also called laser skin resurfacing.

In the fractional technique, the light beam is divided into several microbeams. The effect on the skin will be net. After such exposure, the burn looks like a large accumulation of particles between the unaffected skin.

Important! This can greatly reduce the damage to the skin and promote its rapid healing.

After laser treatment, unaffected skin cells are actively dividing. At the same time, collagen and elastin are produced to ensure youthful skin.

What is partial photopyrolysis and its mode of action?

Partial photothermal decompositionis ​​the process of destroying local tissues by heating them with light (laser) energy.

This effect is caused by two phenomena:

  • First of all, physically destroy the old organization and clear it away, and replace it with a new organization without defects;
  • Secondly, due to heating, skin cells are activated and the so-called "heat shock" occurs. When the cells begin to function like young people, they will actively rebuild the collagen-elastin skeleton of the skin.

Finally, the skin is not only tightened, without age spots, but also smooth: scars and wrinkles are smoothed, stretch marks disappear, pores shrink, and become denser and more elastic.

After performing one step, the visible effect is already obvious, and after performing multiple steps, an obvious revitalizing effect is observed. In addition, the effect was good in the months after the operation.

Process type

There are two types of

.

Types of laser revival
  1. ablation. Exposure to laser light can cause tissue dehydration. As a result, open micro-wounds appear with injured cells around. During the recovery process, noticeable improvement effects were noticed, but there was a risk of infection.
  2. Does not ablate. With such radiation, the skin remains intact, the water from the tissues will not evaporate, and there will be no microscopic wounds. The appearance and healing process of burns takes place under the epidermis, which eliminates the risk of infection, but the results of this rejuvenation will be less obvious.

Important! Experts will select specific techniques based on the individual characteristics of the patient's skin.

Application equipment

The consequences depend not only on the skills of the doctor, but also on the type of hardware provided by the salon or clinic. In most cases, this is a technology made in Europe. Sales are carried out in special shops or on the official website of the manufacturer. One-time use is possible.

Only professional equipment is used, which is expensive. They aredifferent types: ablative and non-ablative (press the working surface against the skin or keep a certain distance).

The problem that can be solved like this

After acne. This kind of scar is a very common problem that can cause physical and emotional distress. This procedure can reduce the appearance of acne scars. Depending on the type of scar, various skin resurfacing methods can be used.

Wrinkles around the eyes. Facial wrinkles and dark circles under the eyes are considered the main symptoms. It is impossible to remove all wrinkles in one method, but their depth will be reduced and not so obvious. To get noticeable results, you will need to perform 4-5 steps.

Important! Abnormal injection movement will help cope with imitated wrinkles, which can also reduce the possibility of new wrinkles in the future.

What problem can laser solve

Wrinkles at the corners of the mouth. It is considered the most serious type of wrinkle. To get rid of them, continuous laser grinding was applied. This method helps to reduce recovery time, but requires more treatment courses (4-5).

Important! To get the best results in a short time, you can combine the process with injecting fillers.

Compared with radio waves and light enhancement, what are the advantages of partial photopyrolysis?

Different from laser skin resurfacing, partial photopyrolysis does not immediately remove the epidermis on the entire surface of the skin, but “partially” removes the epidermis in a locally uniform micro-area, and the size of each part is millimeters. At the same time, since there is no large wound surface and intact skin remains between the micro areas, healing occurs quickly and there is no negative impact. The widely advertised photo and radio wave lifting technology is based on heating collagen fibers without removing the epidermis.

Advantages

The main difference between

and other processes is the ideal balance between efficiency and safety.

Main advantages:

  • The ability to affect any part of the body;
  • Extensive list of indications;
  • The laser will affect about 20% of the damaged skin area;
  • Quick recovery (3-6 days);
  • This procedure is suitable for black patients;
  • The effect is lasting (more than 1 year).

Important! The only drawback is that since this technology is relatively new, all the features of the fractional laser revival are not fully disclosed.

Instructions for use:

  • Wrinkles;
  • Insufficient skin elasticity;
  • Pigmentation;
  • Scar;
  • Expanded pores;
  • Stretch marks.

Reading

Anyone who wants to rejuvenate without braces can use this method.

Local laser treatment can eliminate many blemishes on the face, including:

Program instructions
  • Serious wrinkles on the forehead;
  • Nasolabial fold;
  • The crow's feet around the eyes;
  • The epidermis "flows down";
  • Skin pigmentation, scars, scars, spider veins;
  • Large pores and acne problems.

Laser therapy is very effective in eliminating all these problems.

The only caveat is that, depending on the severity of the defect, several steps may be required.

What is the facial electroporation method and expert feedback on the effectiveness of the procedure. Read the detailed information about yellow peeling here-what it is and what is its purpose.

Process

Before the operation, the beautician may prescribe anti-infective and antibacterial drugs for a few days for prevention.

Important! On the day of the operation, you should completely avoid physical stress, alcohol and smoking.

Before performing partial rejuvenation, the skin must be thoroughly cleaned and treated with a special anesthetic. Sometimes this is not necessary.

Laser irradiation may cause a slight tingling sensation. The duration of this process varies from 10 to 60 minutes. The required number of treatments is allocated to each patient separately. After the exposure is over, moisturizer should be applied.

Your skin needs special care in the future.

Postoperative care
  1. Moisturize the skin several times a day for 10-14 days.
  2. Protect the skin from ultraviolet rays for 2-3 months.
  3. Do not use the scrub for 2-3 weeks.
  4. Give up cosmetics containing retinol and salicylic acid for 2 weeks.
  5. During recovery, try to give up or limit your bad habits.

Attention!Generally, recovery takes 3 to 7 days.

Comments and results

According to the comments of most patients, laser non-ablation skin rejuvenation is indeed very easy to tolerate and the effect is excellent. After 3-6 sessions every 2-4 weeks, you can look 5-10 years younger without having to rest for a long time, and you will not suffer serious trouble during the recovery period.

This technology allows you to preserve the top layer of the epidermis as much as possible.Partially retains the protective properties of the skin, you can go out safely for 2-3 days without forgetting the UV protection. She successfully dealt with most of the first signs of aging. However, in order to permanently remove the mimic wrinkles of the frontal lobe and nasolabial folds, it is recommended to introduce botulinum toxin after the rejuvenation process is over, the toxin cannot make muscles contract and produce new skin wrinkles. With proper facial care, the lifting effect can last up to 3-5 years.

Skin changes

Redness, swelling and discomfort may occur within 2 days after the operation. If this condition is unbearable, painkillers can be used to cool the troubled skin area.

Over time, the skin may become slightly tanned.

Important! Don't do anything-normal skin tone will return on its own after a few weeks. The skin will dry and peel within a week.

The possible unpleasant consequences

Negative consequences

Don’t worry, if your skin becomes red and "burns" after the first step. This does not mean that the process is incorrect, but is considered a natural response of the human body. After 2-3 hours, the nose and eye area may also be swollen.

Important! In order to remove water from the body faster, you should pay attention to quickly remove water from the body (eating less salty and spicy food, taking diuretics).

The next morning, many people saw blood on their skin in horror. It will harden and become crusty. This is also considered a natural reaction. This type of process involves removing the protective layer of the epithelium-a new layer appears under the skin. Therefore, it is strictly forbidden to touch and tear off the hard skin with your hands, otherwise there is a risk of infection and scars may appear on your face. After the tissue heals, the crust will peel off on its own. This can be observed after 5-7 days, please be patient. In another month, the skin on the face will turn pink and can absorb light too-you need to stock up on protective cream.

Adverse reactions after surgery are no exception. There may be rashes, mild scabies and other skin tones on certain areas of the face. As time goes by, this feeling will pass, but it feels very unpleasant. Patients with excessive skin sensitivity are at high risk of side effects.

The beautician will prescribe a separate prescription after partial pyrolysis, but there are some general suggestions. You only need to wash your face with clean warm water (never scald). During the recovery period, do not peel and scrub. You cannot stay in the sun for 7-10 days, after that it is worth using a special cream. It is important to pay attention to proper sleep, nutrition and rest. Follow all the instructions and you can forget the discomfort after two weeks.

Contraindications

To avoid unpleasant consequences, you should ensure that there are no contraindications.

Absolute contraindications include:

Contraindications of the procedure
  • Pregnancy and lactation
  • Easily leave scars;
  • Chronic infectious diseases;
  • Oncology
  • Serious immune system problems;
  • Psoriasis worsened.

The relative ones are:

  • High blood sugar;
  • Kidney disease;
  • Mental health problems;
  • Unwilling to follow expert advice;
  • Sepia

Important!Only beauticians with experience and appropriate skills can be commissioned for surgery.

Preparation and execution

It is very important to find highly qualified experts to perform this process using non-ablative techniques. Due to the subtle effects on the skin, there is no universal technology for everyone. Moreover, we must consider the age and condition of the skin to choose a separate procedure for each patient.

Before the meeting

The preparation phase may be short. With non-ablative methods, there is no need to wait until the tanning disappears. It also allows you to work on skin with small, pustular pimples or acne (the condition will improve significantly after this process). The most important thing is to make sure that there are no contraindications.

A few days before the first treatment, it is important to avoid damaging or severely irritating the skin in the problematic area. Therefore, it is best to give up alcohol-based cosmetics and do not peel off.

You should also stop taking anticoagulants, tetracycline antibiotics and retinol. On the day of the meeting, it is best not to apply any cream on your face.

Technology

The process is very comfortable and takes 10 minutes to half an hour. The patient does not feel severe pain, so local anesthesia is usually not even required. But for people with a higher sensitivity threshold, this method is allowed.

The process execution diagram is as follows:

  • The patient lies comfortably on the sofa;
  • Hair must be placed under a disposable hat;
  • Removed the face in cosmetic residue completely;
  • Cooling conductive adhesive is applied to the problem area;
  • The head of the device moves slowly on the skin;
  • Press the button to generate a laser beam;
  • After treating the entire surface, apply a mask with panthenol.

You can go home with confidence within 15-20 minutes after the session ends.

Rehabilitation period

After laser treatment on the skin, light skin is formed on it. The time it takes to disappear depends on the characteristics of the recovery process of a particular type of skin. It also affects the recovery period. The course of treatment is 2 to 4 weeks. At the same time, there is no need for experts to continuously monitor patients, but it is worth following all the prescribed recommendations consistently within a month, namely:

Recovery period
  • Give up physical exercise;
  • Don’t go to the solarium, bathroom, sauna;
  • Give up decorative cosmetics for a period of time;
  • Protect yourself from any mechanical pressure.

Important! In order to get the desired results and keep them for a long time, it is worth visiting a beautician regularly. The whole process consists of 4-5 links, which will not do any harm.

Method operation

The depth of the laser beam penetrates the skin from a few microns to 3-4 mm. At the same time, although natural protection has been greatly weakened, its surface has not been completely destroyed. The result of this exposure is:

  • Reduce the depth of simulated wrinkles;
  • Almost completely eliminated smallness;
  • Very tight skin;
  • Restore the clarity of the oval face;
  • Fender and double chin reset;
  • Eliminate superficial pigmentation;
  • Soothes the skin;
  • Eliminate spider webs and veins;
  • Shrink pores;
  • Improve skin tone;
  • Improve skin tone, even make skin tone even.

From a visual point of view, after non-ablation rejuvenation, the patient begins to look fresher. After effective treatment from the face, you can "erase" for 5 to 10 years. Will not leave wrinkles, scars and other traces of similar surgical procedures.

Process duration

The duration depends on the size of the area affected by the laser. It takes about 15 minutes for the chin and no more than 80 minutes for the entire face. If only the upper layer of the skin needs to be laser cleaned or resurfaced, it will take much less time than correcting the deeper layers.

Fractional carbon dioxide laser

Ray resurrection involves the use of precise techniques on the epidermis to correct age-related skin problems. This principle is the basis of most modern beauty equipment. Fractional CO2 lasers are very popular and are considered the most innovative development.

Important! This process is abbreviated as "fraxel".

The working principle of fractional carbon dioxide laser

The basis of laser operation is the point effect mechanism, which only heats the upper layer of the skin, leaving the unaffected area of ​​the skin between the "damaged" points. When the entire surface of the skin is damaged, rejuvenation using this laser is superior to outdated methods in many ways, and the possibility of infection, burns and other adverse reactions is several times greater.

The effectiveness of this technique can be explained by the formation of micro-hot areas in the tissues, which are the center of the active process of cell regeneration. Regeneration not only extends to these areas, but also affects healthy tissues.

Important! After partial repair, compared to regenerating the entire facial skin, the skin regenerates much faster, and the effect can last for several years.

Fractional laser overview

Fractional lasers are a relatively new development and already have a specific stage of development.

Phase 1Create a laser laser to recover part of the laser in a non-ablation form for used light. The surface layer of the skin is not affected during use, and the effect only occurs on the deep layer. This procedure has received many positive comments from beauticians and patients.

Important! After some time, it was discovered that the equipment had some defects, so it was necessary to improve it.

Phase 2. The advent of the fractional carbon dioxide laser. It differs from it in that it operates with mixed gas. During the operation of the device, there will be micro-hot columns, which absolutely affect all layers of the skin. Around them, the process of cell division began, and a new process appeared. The advantage of this technique is that it can affect even the most complex scars. In addition, using this method, you can deal with deep wrinkles and pores in the skin. Laser also helps to obtain a more significant skin rejuvenation effect, which is the main goal of this type of surgery. The device can cope with deep wrinkles, scars and obvious skin defects without any problems. The laser beam is quickly absorbed by the water and immediately evaporates.

Important! The device can even affect areas such as décolleté, eyelids and neck.

Nowadays, most anti-aging drug manufacturers are developing similar lasers. By the way, each patient can purchase one or another type of equipment. When purchasing equipment with fractional lasers, please be sure to pay attention to its technical description and properties: energy density, size of micro hot zone, etc.

The characteristic of fractional CO2 laser is that it is easy to use, easy to control, and can choose various geometric shapes and sizes of illumination areas.

Important! Those who intend to purchase such a rejuvenating device should trust the reliability of manufacturers and suppliers, because from a technical point of view, lasers are quite complex.